Feme ea li-drill bits tsa API IADC216 4.5 inches (114mm)

Feme ea li-drill bits tsa API IADC216 Setšoantšo se Hlahisitsoeng sa lisenthimithara tse 4.5 (114mm)

Lebitso la Letšoao:	Bochabela bo Hōle
Setifikeiti:	API le ISO
Nomoro ea Mohlala:	IADC216
Bonyane ba Odara:	Sekotwana se le seng
Lintlha tsa sephutheloana:	Lebokose la Plywood
Nako ea thomello:	Matsatsi a 5-8 a mosebetsi
Molemo:	Tshebetso e Potlakileng
Nako ea Tiisetso:	Lilemo tse 3-5
Kopo:	Oli, Khase, Geothermy, Ho cheka seliba sa metsi, HDD, Merafo

Romella imeile ho rona

Qaqiso ea Sehlahisoa

Video e Amanang

Khataloge

Tlhaloso ea Sehlahisoa

Sesebelisoa sa ho drilla rock roller rock roller sa API sa tšepe se rekisoa ka bongata ho latela khotheishene e tlase ka ho fetisisa le boleng bo botle bo tsoang fekthering ea China.
Tlhaloso ea Bite:
IADC: 216 - Karolo ea tšepe ea ho beakanya e koetsoeng ka meno e nang le tšireletso ea gauge bakeng sa libopeho tse thata tse mahareng ho isa ho tse mahareng tse nang le matla a phahameng a ho hatella.
Matla a Khatello:
0 - 35 MPA
0 - 5,000 PSI
Tlhaloso ea fatše:
Majoe a bonolo haholo, a sa aroloang, a sa kopaneng hantle joalo ka letsopa le lehlabathe le sa kopaneng hantle, majwe a mokoetla a marl, letsoai, gypsum le mashala a thata.
Re ka fana ka di-drill tooth le di-drill tsa TCI tricone bits ka boholo bo fapaneng (ho tloha ho 3 ”ho isa ho 26”) le boholo ba Dikhoutu tsa IADC.

Ho ea ka thepa ea ho seha, li-cone tse tharo li ka aroloa ka li-bit tsa TCI le li-bit tsa meno tse sililoeng.
Karolo ea tricone ea meno e sitsoeng IADC216 e etselitsoe ho etsoa ka mokhoa o bonolo haholo. Ho khetha likarolo tse nepahetseng tsa ho phunya majoe ho bohlokoa haholo pele o qala projeke.
Bothata ba mafika bo ka ba bonolo, bo mahareng le bo thata kapa bo thata haholo, boima ba mofuta o mong oa mafika le bona bo ka fapana hanyane, mohlala, lejoe la mokoetla, lejoe la lehlabathe, shale le na le lejoe la mokoetla le bonolo, lejoe la mokoetla le mahareng le lejoe la mokoetla le thata, lejoe la lehlabathe le mahareng le lejoe la mokoetla le thata, jj.
Morerong oa ho cheka, Bochabela bo Hōle bo na le boiphihlelo ba lilemo tse 15 le linaha tse fetang 30 ho fana ka lits'ebeletso tsa ho cheka le mekhoa e tsoetseng pele ea ho cheka bakeng sa lits'ebetso tse fapaneng. Ts'ebeliso e kenyelletsa tšimo ea oli, khase ea tlhaho, lipatlisiso tsa jeoloji, ho tjhesa metsi, merafo, ho cheka seliba sa metsi, HDD, kaho, le motheo. Li-drill bits tse fapaneng li ka fetoloa ho latela sebopeho se fapaneng sa lefika hobane re na le fektheri ea rona ea li-drill bits e netefalitsoeng ke API le ISO. Re ka fa moenjiniere oa rona tharollo ha u ka fana ka maemo a itseng, joalo ka ho thatafala ha majoe, mefuta ea rig ea ho cheka, lebelo la rotary, boima ba bit le torque. Ho boetse ho re thusa ho fumana li-drill bits tse loketseng ka mor'a hore u re bolelle ka ho cheka seliba se otlolohileng kapa ho cheka se otlolohileng, ho cheka seliba sa oli kapa ho cheka se sa chekoeng kapa ho bokella motheo.

Tlhaloso ea Sehlahisoa

Tlhaloso ea Motheo
Boholo ba Lejoe la Rock	4 1/2"
Boholo ba Lejoe la Rock	114.3mm
Mofuta oa Bite	Leino la Tšepe la Tricone Bit/ Leino le sitsitsoeng la Tricone Bit
Khokahano ea Khoele	PIN ea REG ea API ea 2 3/8
Khoutu ea IADC	IADC 216
Mofuta oa ho Beha	Koranta e Tiisitsoeng ea Roller Bearing
Tiiso ea ho Beha	Tiiso ea Rabara
Tšireletso ea Serethe	Ha e fumanehe
Tšireletso ea mohatla oa hempe	E fumaneha
Mofuta oa Potoloho	Ho potoloha ha seretse
Boemo ba ho Cheka	Ho cheka ka rotary, ho cheka ka mocheso o phahameng, ho cheka ka botebo, ho cheka ka enjene
Li-nozzle	Lesoba le Bohareng la Jet
Liparamente tse sebetsang
WOB (Boima ba 'Mele)	7,705-21,830 liponto
WOB (Boima ba 'Mele)	34-97KN
RPM(r/min)	60~180
Sebopeho	Libopeho tse bonolo ho isa bohareng tse nang le matla a phahameng a ho hatella, joalo ka lejoe la seretse, gypsum, letsoai, lejoe la mokoetla le bonolo, jj.

Mofuta ona oa meno a tšepe a tricone bit o na le lesoba le bohareng le loketseng ho cheka RC (ho cheka Reverse Circulation).
IADC216 tricone bit e ka tjheka dibopeho tse thata ho feta IADC126, ho kgetha IADC e nepahetseng ho ya ka thata ya majwe ke mohato wa pele wa ho tjheka ka bokgoni bo phahameng.
Meno a teteaneng hodima dikhoune tsa di-tricone bits a bolela meno a manyane le mafika a thata bokgoni ba ho tjheka, meno a makgutshwane le a manyane a etsa hore meno a sitsweng a be le di-tricone drill bits a ka tjheka esita le majwe a thata a bonolo kapa a mahareng mme ROP e phahame ho feta di-TCI tricone bits. Bokahodimo ba dikhoune bo ntlafatswa ke tungsten carbide hard-face.
Ka kopo ikopanye le rona ho fumana tlhahisoleseling e batsi, Bochabela bo Hōle bo ea lipontšong linaheng tse ngata lefatšeng ka bophara, re tšepa ho bua le uena lifahleho li talimane haufinyane.