Bit ea tricone ea fektheri ea API IADC537 7 5/8 ” (193.7 mm)

Setšoantšo se Hlahisitsoeng sa API factory tricone bit IADC537 7 5/8 ”(193.7 mm)

Lebitso la Letšoao:	Bochabela bo Hōle
Setifikeiti:	API le ISO
Nomoro ea Mohlala:	IADC537G
Bonyane ba Odara:	Sekotwana se le seng
Lintlha tsa sephutheloana:	Lebokose la Plywood
Nako ea thomello:	Matsatsi a 5-8 a mosebetsi
Molemo:	Tshebetso e Potlakileng
Nako ea Tiisetso:	Lilemo tse 3-5
Kopo:	Oli, Khase, Geothermy, Ho cheka seliba sa metsi, HDD, Merafo

BOTSA

Romella imeile ho rona

Qaqiso ea Sehlahisoa

Video e Amanang

Khataloge

Tlhaloso ea Sehlahisoa

Likotoana tsa ho cheka tsa tricone tse potolohang tsa API tse ngata tse tsoang fekthering ea Chaena ke tsa seliba se tebileng sa oli.
Tlhaloso ea Bite:
IADC: 537 - Karolo ea bearing e koetsoeng ea koranta ea TCI e nang le tšireletso ea gauge bakeng sa libopeho tse bonolo ho isa ho tse mahareng tse nang le matla a tlase a ho hatella.
Matla a Khatello:
85 - 100 MPA
12,000 - 14,500 PSI
Tlhaloso ea fatše:
Majoe a mahareng a thata le a kgohlang a kang majwe a lehlabathe a nang le mela ya quartz, lejwe la mokoetla le thata kapa chert, majwe a hematite, lejwe le thata, le kgohlang hantle le kang: majwe a lehlabathe a nang le quartz binder, dolomites, shales tsa quartzite, magma le majwe a nang le di-coarse grained.
Re ka fana ka li-bit tsa TCI ka boholo bo fapaneng (ho tloha ho 3" ho isa ho 26") le boholo ba likhoutu tsohle tsa IADC.

Liindasteri tsa Bochabela bo Hōle li ikhethile ka ho khetheha ka likotoana tsa ho drilla, joalo ka likotoana tsa tricone, likotoana tsa PDC, opener ea lesoba la HDD, li-cutter tsa roller tsa motheo bakeng sa lits'ebetso tse fapaneng.
Jwalo ka fektheri e etellang pele ya di-drill bits Chaena, sepheo sa rona ke ho eketsa nako ya tshebetso ya di-drill bits. Kamehla re leka ho ntlafatsa di-bits ka sekgahla se hodimo sa ho kenella. Morero wa rona ke ho rekisa boleng bo hodimo ka theko e tlase.
Karolo ea ho cheka seliba sa khase ea shale ea lisenthimithara tse 7 5/8 IADC537G, bakeng sa libopeho tse mahareng.
Tekanyo ea tricone ea TCI ea lisenthimithara tse 7 5/8 (200.0mm), e le bophara bo tloaelehileng, e loketse bareki ba sebetsang ho chekeng liliba tsa khase ea shale.
IADC537G e bonts'a likarolo tse ling tsa tricone bit.
Taba ea pele, ke li-chisel-inserts, bakeng sa ho cheka boima bo mahareng le libopeho tse teteaneng tse nang le matla a phahameng a ho hatella le lera le itseng le khorofo, ho tloha ho 80 ho isa ho 150Mpa. Ea bobeli, e koetsoe ka jenale e nang le tšireletso ea gauge. Ho feta moo, e na le tšireletso e eketsehileng ea gage ka morao ho letsoho/leoto.

Tlhaloso ea Sehlahisoa

Tlhaloso ea Motheo
Boholo ba Lejoe la Rock	Li-inchi tse 7 5/8
Boholo ba Lejoe la Rock	194.mm
Mofuta oa Bite	TCI Tricone Bit
Khokahano ea Khoele	PIN ea REG ea API ea 4 1/2
Khoutu ea IADC	IADC 537G
Mofuta oa ho Beha	Koranta e tiisitsoeng ka Tšireletso ea Tekanyo
Tiiso ea ho Beha	Elastomer kapa Rabara/Tšepe
Tšireletso ea Serethe	E fumaneha
Tšireletso ea mohatla oa hempe	E fumaneha
Mofuta oa Potoloho	Ho potoloha ha seretse
Boemo ba ho Cheka	Ho cheka ka rotary, ho cheka ka mocheso o phahameng, ho cheka ka botebo, ho cheka ka enjene
Li-nozzle	Linotlolo tse tharo
Liparamente tse sebetsang
WOB (Boima ba 'Mele)	Liponto tse 19,774-43,592
WOB (Boima ba 'Mele)	88-194KN
RPM(r/min)	50~220
Sebopeho	Sebopeho se mahareng se nang le matla a tlase a ho hatella, joalo ka se mahareng, shale e bonolo, lejoe la mokoetla le bonolo le mahareng, lejoe la mokoetla le bonolo le mahareng, lejoe la lehlabathe le bonolo le mahareng, sebopeho se mahareng se nang le di-interbed tse thata le tse kgohlang, jj.

Ho phaella moo, disentimitara tse 7 5/8 ke boholo bo tlwaelehileng tshimong ya merafo, bakeng sa ho tjheka lesoba la ho phatloha. Empa e fapane le seliba sa kgase ya shale se potolohang ke mokelikeli wa seretse.