Moetsi oa li-bits tsa Tricone IADC127 4 9/16 inches (115.9mm)

Moetsi oa li-tricone bits IADC127 Setšoantšo se Hlahisitsoeng sa lisenthimithara tse 4 9/16 (115.9mm)

Lebitso la Letšoao:	Bochabela bo Hōle
Setifikeiti:	API le ISO
Nomoro ea Mohlala:	IADC127
Bonyane ba Odara:	Sekotwana se le seng
Lintlha tsa sephutheloana:	Lebokose la Plywood
Nako ea thomello:	Matsatsi a 5-8 a mosebetsi
Molemo:	Tshebetso e Potlakileng
Nako ea Tiisetso:	Lilemo tse 3-5
Kopo:	Oli, Khase, Geothermy, Ho cheka seliba sa metsi, HDD, Merafo

Romella imeile ho rona

Qaqiso ea Sehlahisoa

Video e Amanang

Khataloge

Tlhaloso ea Sehlahisoa

Li-clues tse tharo tsa tšepe tsa API tse koetsoeng ka bongata li thehiloe thekong e tlase le boleng bo botle ho tsoa ho moetsi oa Chaena
Tlhaloso ea Bite:
IADC: 127 - Karolo e koetsoeng ea bearing bit ea tšepe e nang le tšireletso ea gauge bakeng sa libopeho tse bonolo tse nang le matla a tlase a ho hatella le ho phunya habonolo.
Matla a Khatello:
0 - 35 MPA
0 - 5,000 PSI
Tlhaloso ea fatše:
Majoe a bonolo haholo, a sa aroloang, a sa kopaneng hantle joalo ka letsopa le lehlabathe le sa kopaneng hantle, majwe a mokoetla a marl, letsoai, gypsum le mashala a thata.
Re ka fana ka di-drill tooth le di-drill tsa TCI tricone bits ka boholo bo fapaneng (ho tloha ho 3” ho isa ho 26”) le boholo ba Dikhoutu tsa IADC.

Ho ea ka thepa ea ho seha, li-cone tse tharo li ka aroloa ka li-bit tsa TCI le li-bit tsa meno tse sililoeng.
Karolo ea tricone ea meno e sitsoeng IADC127 e etselitsoe ho etsoa ka mokhoa o bonolo haholo. Ho khetha likarolo tse nepahetseng tsa ho phunya majoe ho bohlokoa haholo pele o qala projeke.
Bothata ba mafika bo ka ba bonolo, bo mahareng le bo thata kapa bo thata haholo, boima ba mofuta o mong oa mafika le bona bo ka fapana hanyane, mohlala, lejoe la mokoetla, lejoe la lehlabathe, shale le na le lejoe la mokoetla le bonolo, lejoe la mokoetla le mahareng le lejoe la mokoetla le thata, lejoe la lehlabathe le mahareng le lejoe la mokoetla le thata, jj.
Morerong oa ho cheka, Bochabela bo Hōle bo na le boiphihlelo ba lilemo tse 15 le linaha tse fetang 30 ho fana ka lits'ebeletso tsa ho cheka le mekhoa e tsoetseng pele ea ho cheka bakeng sa lits'ebetso tse fapaneng. Ts'ebeliso e kenyelletsa tšimo ea oli, khase ea tlhaho, lipatlisiso tsa jeoloji, ho tjhesa metsi, merafo, ho cheka seliba sa metsi, HDD, kaho, le motheo. Li-drill bits tse fapaneng li ka fetoloa ho latela sebopeho se fapaneng sa lefika hobane re na le fektheri ea rona ea li-drill bits e netefalitsoeng ke API le ISO. Re ka fa moenjiniere oa rona tharollo ha u ka fana ka maemo a itseng, joalo ka ho thatafala ha majoe, mefuta ea rig ea ho cheka, lebelo la rotary, boima ba bit le torque. Ho boetse ho re thusa ho fumana li-drill bits tse loketseng ka mor'a hore u re bolelle ka ho cheka seliba se otlolohileng kapa ho cheka se otlolohileng, ho cheka seliba sa oli kapa ho cheka se sa chekoeng kapa ho bokella motheo.

Tlhaloso ea Sehlahisoa

4 9/16 inches ke boholo bo ikhethang ba ho cheka seliba sa metsi kapa sa oli, e sebetsa hantle ka mechine e menyenyane ea ho cheka 'me e sebelisoa haholo lefatšeng.
Karolo ea lefika la tšepe ea tricone e boetse e bitsoa karolo ea lefika la tricone e sitsoeng e ka cheka lejoe la seretse le bonolo, esita le lejoe la mokoetla le bonolo, likhoune li thatafalitsoe ke tungsten carbide, bearing e koetsoe ka bolo, bearing e tiisitsoeng ea elastomer (rabara) ea boemo bo holimo - HNBR O-ring, sistimi e tlatsang mafura e tlotsa bearing, bophelo ba ho sebetsa bo bolelele haholo.

Tlhaloso ea Motheo
Boholo ba Lejoe la Rock	4 9/16"
Boholo ba Lejoe la Rock	115.9 mm
Mofuta oa Bite	Leino la Tšepe la Tricone Bit/ Leino le sitsitsoeng la Tricone Bit
Khokahano ea Khoele	PIN ea REG ea API ea 2 7/8
Khoutu ea IADC	IADC 127
Mofuta oa ho Beha	Koranta e Tiisitsoeng ea Roller Bearing
Tiiso ea ho Beha	Tiiso ea Rabara
Tšireletso ea Serethe	E fumaneha
Tšireletso ea mohatla oa hempe	E fumaneha
Mofuta oa Potoloho	Ho potoloha ha seretse
Boemo ba ho Cheka	Ho cheka ka rotary, ho cheka ka mocheso o phahameng, ho cheka ka botebo, ho cheka ka enjene
Li-nozzle	Lesoba le Bohareng la Jet
Liparamente tse sebetsang
WOB (Boima ba 'Mele)	9,213-26,065 liponto
WOB (Boima ba 'Mele)	41-116KN
RPM(r/min)	70~170
Sebopeho	Meetso e bonolo e nang le matla a tlase a ho hatella le ho tjheka habonolo, jwalo ka lejwe la seretse, gypsum, letswai, lejwe la mokoetla le bonolo, jj.